Instructions for using the Herd multifunctional vegetable slicer FAQ NEWS 切菜机_蔬菜清洗风干机_果蔬清洗去皮机_打碎机_果蔬切片机

Hede Mechanical Multi functional Vegetable Cutting Machine

1 Machine parameters（Note: Users can customize a single machine head according to their processing needs）

Model: Multi functional vegetable slicer

Voltage:220V

Power:1.1kw+1.1kw+0.55kw

Yield: Leafy vegetables:600-1000kilogram/hour

Roots and rhizomes:300-1000kilogram/hour

Specifications for cutting leafy vegetables:1-60mmadjustable

Weight approximately:140kg

Overall dimensions:one thousand one hundred and sixty×five thousand and three hundred×1300mm

II feature

① Used for slicing, shredding, and cutting bulbs (those with softer texture), and cutting leafy vegetables into long strips, shreds, and slices.

② Suitable for central kitchen practitioners, canning factories, rapid cooling factories, dry food processing, agricultural product processing, snack shops, and school restaurants.

③ This machine is divided into two parts with different functions. It can process bulbs and cut products such as potatoes, sweet potatoes, taro, onions, eggplants, melons, etc; Leafy vegetables can be processed: celery, cabbage, Korean cabbage, spinach, chili, etc.

① The skeleton of this machine isthree hundred and fourMade of stainless steel material, the bulb part is made of aluminum magnesium alloy material, which is durable and long-lasting.

② Make the vegetable cutting speed fast, and it can withstand the same amount of timetenHuman work saves time and effort.

1 Name Introduction

1 Leafy vegetable cutting: Leafy vegetables can be processed with celery, cabbage, cabbage, spinach, chili, etc.

2 Corm cutting: can cut potatoes, sweet potatoes, taro, onions, eggplants, melons, lotus roots, etc.

3 Upper pressure wheel set: Clamp and deliver leafy vegetables to the rotating blade.

4 Electric control box: start or stop cutting work, with speed adjustment on it, pay attention to the input power supply220V/50Hz.

◆ Power indicator light: When the power is connected, it lights up. It should be noted that the inverter is also powered on at this time. Therefore, if the machine is not in use, the power cord must be disconnected to prevent the inverter from heating up while powered on.

◆ Leaf vegetable cutting start button: Simultaneously start the rotary blade and feeding conveyor.

◆ Rotary blade speed: The speed of the rotary blade can be set through a frequency converter.

Conveyor belt speed: The rotation can be set to the speed of the large conveyor through a frequency converter.

◆ Corm cutting start button: Start the rotation of the aluminum disc of the corm, with a fixed speed.

II operating steps

⑴ Pre startup inspection:

1 Confirm that the power supply is220VIt must be connected to the ground wire;

2 Confirm whether the adjustable parts and fixing screws of the machine are locked tightly;

3 When the power supply is connected to the cutter head and the rotation direction is correct, the power indicator light is on and the frequency converter is powered on.

4 Replace the required cutter head, fix it well, and there is no interference.

⑴ Operation begins (leafy vegetable section); First, clean the machine with vegetable cleaner

1 Activate the leafy vegetable cutting button to drive the motor to operate the cutting tool. At this time, the rotary blade operates according to the frequency converter setting, and the conveyor also operates according to the frequency converter setting;

2 Setting the frequency can obtain the required cutting size;

3 Place the object to be cut at the entrance of the green conveyor belt, which will be brought into the lower pressure group and cut by the cutter head;

4 When the cutting stop button for leafy vegetables is pressed upon completion, the motor will stop.

⑵ Operation begins (corms)

1 Activate the bulb cutting start button, causing the motor to drive the tool to run, and at this time, the cutter head runs at a fixed speed.

2 Place the object to be cut at the feeding port and it will be brought in and cut by the cutter head;

3 Be careful not to enter hard objects such as stones.

1 Maintenance and Precautions

1 After the usual operation is completed, pay attention to cleaning work and install the wire reel into the aluminum reel;

1 When there is abnormal operation and noise, it is necessary to immediately stop and check;

2 This machine requires customers to pay attention to various maintenance and operation skills when using it, and special attention should be paid not to put stones and metal objects in it;

3 Electrical box button diagram